‹

20BBL Fermenter

›

‹

›

20BBL Fermenter

Get Quote Now

20BBL brewery stainless steel fermenter


Introduction of fermenting equipment

1.Product name: 1HL to 100HL beer fermentation tank fermentation vessel.

2. Volume: 1HL to 100HL 

3. Material: SUS304 or SUS316L, as per customer's requirement

4. Thickness: 3.0-4.0mm for inner tank, 1.5mm for dimple jacket, 2.00mm for outer shell, as per customer's requirement.

5. Construction: dish top, cylinder body and 60 degree cone bottom; single-layer or jacketed.

6.If jacketed, it has dimple jacket and PU insulation, insulation thickness 50.00-100.00mm as per customer's requirement.

7. Polishing treatment: inner tank mirror polished, outer shell can be either mirror polished or matt polished.

8. Accessories: manway on side, yeast inlet, CIP spraying ball, CIP pipe, themowell, sample valve, spunding valve, pressure gauge, lifting ear, jacket inlet /outlet, outlet, brace for legs, adjustable feet.


Function: Beer fermentation, 12-15 days  
1Total capacity                                                                                   3240L
2Effective capacity20BBL
3SizeD1560*H3445mm
4Weight655kg
5MaterialSUS304
6Exterior shell2mm
7Dimple jacket1.5mm
8Interior shell3mm
9Insulation materialPU
10Insulation TH80mm
11Top typeDished head
12Manhole typeSide oval manhole
13Manhole size530x430mm
14Inner cone60 degree
15CIP pipe diameterΦ32
16CIP ball(1)360º Rotating spray ball
17Temperature sensePT100 sensor
18Thermowell diameterΦ10
19Inner Polishing0.2-0.4micron
20Design pressure0.2Mpa
21Cooling typeDimple cooling jacket
22Cooling area5.6m2  
23Cooling jacket inlet  G1
24Cooling jacket outletG1
25Pressure controlMechanical pressure relief valve
26Pressure gauge1pc
27Hops portΦ102
28Sample portΦ38
29Drain outletΦ51
30CO2 exhaust pipe1pc
31Safety valve (PVRV)Φ51


Spunding valve assembly

This assembly can be used to prevent excessive pressure in the tank. It can also be used to maintain a set pressure during fermentation. One way you could use it would be to set the valve to 10psi then it will maintain that pressure within the vessel, as fermentation progresses any pressure generated above 10psi would be vented to atmosphere. This now only protects your tank but it also protects the beer by maintaining a safe blanket of Co2 in the head space above the beer. Our quality unit also has the added feature of an observation cup that helps identify any pressure release We generally fill this with sanitizer or ethanol, this can also be used to identify when fermentation is complete..


Rotating raking arm 

Use Rotating Racking Arm, It can easily rotate to drain out all of the precious beer and help avoid large yeast clumps.


Carbonation stone 

We use high quality stones with our quality welded sanitary fittings.


Cooling Jacket

As with our dimple jacket, we use a high quality dimple type, this helps create turbulent flow and greatly increases the efficiency of the cooling medium used. 


Dimple Jacket

We choose the dimple jacket which has better cooling effect; it expands the cooling area and makes better cooling effect.


Side Manway

Embedded manhole in fermenter will have a good insulation. It is for the capacity above 1000L.



Perlick style Sanitary sample valve

Perlick style valve  is tri clamp connection instead of thread connection, 

thus can effectively reduce the chance of hiding bacterium, more sanitary and clean.


Tri clamp carbonation port with stone

Easy to assembly and disassemble, more sanitary


Passivation for inner tank

Now we do the acid wash passivation to the interiorof the tanks so that it can form a protect layer which can protect stainless steel from being corroded easily. For all the welding, we will also do the Acid Wash. 


Tri Clamp PT100

Easy to assembly and disassemble


Get Quote Now 

Send